Non-destructive entry first, always - and we re-key Schlage, Kwikset, and Baldwin locks on the spot while you watch
You get a price before we start. It does not change when we arrive. No surprises.
Fast, Reliable Rekey Locks Across Corona
Rekeying a lock in Corona typically runs $20 – $35 per cylinder, and a full-house rekey on a 1990s tract home off the 91 usually lands between $95 and $180 total. You call, we quote the full price in writing before anyone drives out, and you get a live arrival time you can track. No bill that swells between the estimate and the invoice, and no anonymous tech at your door. Preston Locksmith & Security has answered calls from Corona homeowners for everything from a single Schlage deadbolt to every exterior lock on a Sierra Del Oro two-story. Call (409) 405-4485 and a live person picks up, 24/7.
Why Preston Locksmith & Security Is Corona’s Preferred Rekey Locks Company
Corona is a city where a rekey usually means one of two jobs, and the difference matters for your quote. We know this because we’ve done both hundreds of times. The tract neighborhoods off the 91 and SR-71 corridors, Sierra Del Oro, Corona Hills, South Corona, Eagle Glen, those homes mostly shipped with builder-grade Kwikset and Schlage cylinders. Quick, straightforward pin swaps. But the older single-family homes nearer Grand Boulevard and downtown Corona often still carry original mortise lock hardware, which takes different skills and a different price. We arrive knowing which one you’re likely dealing with because you told us the neighborhood when you called.
Our Rekey Locks technicians are background-checked and arrive in uniform. You get a written price before any work starts, and that price is the price on the invoice. Every job includes The Relay Visibility Guarantee: a live trackable arrival time, before-and-after photos, and a written guarantee stamped on every repair. If it’s not done right, our 365-Day Done Right Promise means we make it right, including a free second visit. Kevin Yoon, who leads our team, holds every Corona job to that standard: the price you approved on the phone is the price you pay when the work is done.
Rekey House in Corona
Rekey House in Corona means opening every exterior lock, pulling the cylinder, and swapping the internal pins so the old keys stop working, all without replacing the hardware itself. New homeowners ask for this the same week they get their keys, and it’s the right move. You can’t know how many copies the previous owner cut, or whether a neighbor, contractor, or ex-tenant still has one. We reset the pin and tumbler stacks to fresh pins, cut new keys, and hand them to you knowing the seller’s copies no longer operate anything.
Cost for a Rekey House in Corona: most single-family homes have four to six exterior keyed locks. At $20 – $35 per cylinder, you’re looking at roughly $95 to $180 total, plus the cost of any new keys you want cut. We confirm the exact number of locks over the phone, match it to the hardware you actually have (Kwikset, Schlage, Medeco, whatever it is), and send you a written price before dispatch.
After a Rental Turns Over
Landlords and property managers across Corona’s rental stock, especially the newer apartment communities along Magnolia Avenue and the single-family rentals in South Corona, call us between tenants. One rekey, a handful of new keys, and the previous tenant’s copies are scrap metal. Some property managers have us key all their units to a master key so maintenance can use one key while each resident keeps their own.
New Construction and Contractor Keys
If you just closed on a new build in the Bedford or Terramor master-planned communities, your builder’s contractor keys still fit your locks. Rekeying is a 30-to-60-minute job that ends that exposure.
Lock Rekey in Corona
Lock Rekey in Corona usually means a smaller scope than a full house: one problematic door, a garage side entry, a back gate, or a lock a roommate or ex-partner used to have a key to. We rekey individual cylinders for $20 – $35 each, and we do it on the spot. The procedure is identical to a whole-house rekey, just fewer cylinders. We pull the lock, swap the pins, and cut new keys while you watch.
This is also the service for situations where a lock isn’t broken but you’ve lost track of a key. Maybe a house cleaner, dog walker, or contractor had a copy and you’re not comfortable with that anymore. Nothing about the lock changes on the outside. The deadbolt you already own keeps doing its job, it just only answers to your new key now.
Kwikset SmartKey and Rekeyable Hardware
Many Corona tract homes have Kwikset SmartKey locks, which support a tool-free rekey. We service these regularly, matching the new key to any existing keypad or smart entry without swapping the hardware. Just because the lock is “smart” doesn’t mean it needs to be replaced when the key tracking changes.
Mortise Locks Near Grand Boulevard
Older homes near Grand Boulevard and the historic streets around downtown Corona still carry mortise lock bodies, not the bored cylinders found in newer construction. These take different labor, and we quote them honestly on the phone based on you telling us the neighborhood. The wrong tech with a generic kit will quote you a flat rekey and then try to sell you a full replacement on arrival. We don’t do that.
Trusted Brands We Service in Corona
Preston Locksmith & Security is trained and equipped to service Schlage, Kwikset, Medeco, Yale, Baldwin, Mul-T-Lock, Sargent, and Abloy hardware. In Corona, that matters because the housing stock is genuinely mixed. Your 2005 tract home near Eagle Glen probably has Schlage or Kwikset cylinders; your commercial unit in a Corona industrial park off the 15 might carry Medeco high-security hardware. We stock the pins, springs, and cylinders to rekey both in a single visit. No ordering parts, no return trip, no “we’ll need to schedule a follow-up.” A Medeco rekey is not a generic rekey, and a technician who hasn’t worked on that brand isn’t going to figure it out in your driveway.
Common Rekey Locks Problems We See in Corona Homes
- Worn pins in older mortise locks near Grand Boulevard. A cheap rekey reuses the existing worn pins, and the “new” key works for a few weeks before it starts dragging or sticking. We replace pins, not reuse them, and the difference shows up within the first month.
- Builder-grade Kwikset and Schlage cylinders that have never been serviced once. Corona tract homes from the 1990s and 2000s rarely get lock maintenance until a key actually breaks. We open the cylinder, clean out years of dust and grime, and install fresh pins so the new key turns smoothly from day one.
- Smart lock or keypad entry that a previous owner installed and then lost track of. Just because the unit has a code doesn’t mean a physical key doesn’t still override it. Rekeying the cylinder restores single-key control without scrapping the smart lock itself.
- A key snapped off in the cylinder. This is still a rekey job, and a common one around Corona. We extract the broken key, rekey the cylinder, and hand you new keys rather than trying to sell you a whole new lock because a technician wasn’t equipped to do the extraction.
Pricing for Rekey Locks in Corona, CA
Rekeying a standard lock in Corona runs $20 – $35 per cylinder. A full-house rekey on a typical tract home with four to six keyed exterior locks lands between $95 and $180. A single door rekey is $35 or less. Mortise lock rekeying near Grand Boulevard can run $35 – $50 per lock because the cylinder has to be removed from the lock body and bench-pinned, but we’ll confirm that over the phone once you tell us the neighborhood. What affects the price: the number of locks, the brand and type of hardware, and whether you want extra keys cut. The price we quote on the phone is the full price. No dispatch fee added when we arrive, no per-lock surprise, no travel charge. Call (409) 405-4485 for a free estimate.
We Also Serve Cities Near Corona
Our Corona customers send us to family and workplaces in Norco, Chino, Chino Hills, and Irvine. If you own property in more than one of these cities, one call schedules the work and one written quote covers it all. We rekey locks throughout the Inland Empire and nearby Orange County with the same guarantee: a written price, a live arrival time, before-and-after photos, and a written guarantee. See our Rekey Locks in Corona page for details on how we serve the Corona area specifically.
Serving Corona, CA - Our Local Coverage Area
We’re based in the Corona area and know this community well. Use the map below to see our service coverage - if you’re nearby, we can almost certainly help.
FAQs About Rekey Locks in Corona
Rekey them. The builder-grade Kwikset and Schlage hardware in 1990s and 2000s Corona tract homes is perfectly serviceable, and rekeying costs $20 – $35 per cylinder versus hundreds for replacement hardware you don’t need. Whether the lock is a standard pin-and-tumbler or a Kwikset SmartKey, we reset it to new keys without touching the hardware. Call (409) 405-4485 and we’ll confirm the brand over the phone and quote the rekey in writing before we arrive.
A full-house rekey in Corona takes 30 to 60 minutes for most tract homes. We arrive with the pins and keys prepped, and we rekey each cylinder in place. The exception is older mortise locks near Grand Boulevard, which can add 15 to 20 minutes per lock. You’ll get a live trackable arrival time before we head over, and we finish most Corona jobs in under an hour.
Your technician arrives in uniform, is background-checked, and your booking confirmation includes the tech’s name and a live trackable arrival time via The Relay Visibility Guarantee. When the doorbell rings, it’s the person whose name you already have, and the price on their tablet matches the price you approved on the phone. No anonymous contractors, no unmarked vans.
We rekey smart locks and keypad entries in Corona all the time. Most Kwikset SmartKey, Schlage Connect, and similar units have a standard mechanical cylinder we can pin to new keys while you keep the same smart hardware. We match the new key to any existing keypad or app-based entry. No new unit required unless the electronics themselves have failed. Call (409) 405-4485 and we’ll walk through what you’ve got.
Yes, extracting a stuck or snapped-off key and then rekeying the cylinder is a standard job for us in Corona. We remove the broken key, clean and re-pin the cylinder, and cut you new keys. You don’t need a full lock replacement just because a key broke off, and we won’t try to sell you one. The rekey cost stays at the per-cylinder rate plus a small extraction fee, and we’ll quote it in writing before we begin.
Written by Kevin Yoon, Owner at Preston Locksmith & Security, serving Corona and the surrounding Inland Empire since 2008.