Abloy Lock Rekeying Nationwide | Preston Locksmith & Security

Abloy Lock Rekeying: The Los Angeles Owner’s Guide

Rekeying an Abloy lock in Los Angeles typically runs $35 – $85 per cylinder for the labor, plus $15 – $40 per key if you need new ones cut. We stock Abloy-compatible pins and key blanks on our trucks, so most residential Abloy deadbolts and knobs can be rekeyed same-day, usually within a 2-hour arrival window. Most people discover they need this work when a tenant moves out, a cleaner or contractor stops returning calls, or a roommate situation changes and suddenly the old keys feel like a loose end.

Call (409) 405-4485

Abloy uses a rotating disc cylinder system, not the pin-and-tumbler design you’ll find in a Schlage or Kwikset. That means rekeying is mechanically different, and the parts are not interchangeable with standard locksmith pins. If someone tells you they can rekey an Abloy with generic pins, they’re wrong, and you’ll end up with a cylinder that either seizes or opens with keys that were never supposed to work.

Key takeaways:

• Abloy rekeying in Los Angeles costs $35 – $85 per cylinder, parts included, written price before we start.
• Same-day service is standard for Abloy disc-cylinder locks on our truck stock.
• Abloy locks rekey differently than Schlage or Kwikset – they need Abloy-specific discs, not generic pins.
• After rekeying, old keys are permanently dead. No exceptions.

Which Abloy Models This Applies To

We rekey Abloy Classic, Abloy Profile, Abloy Disklock, and Abloy Protec cylinders. The model matters because each series uses a different disc profile and key blank, and they are not cross-compatible. A Protec key will not slide into a Classic cylinder, and a Classic rekey kit will not fit a Profile lock.

How to identify what you have: look at the face of the cylinder. Abloy stamps a small model code near the keyway, usually something like “CLASSIC” or “PROTEC” along with a patent number. If the stamp is worn off, the keyway shape is the tell. Classic and Disklock have a wide, oval keyway with a flat key. Protec has a narrower groove and a key with a distinctive wave-cut edge. Bring the key or a photo of it when you call, and we can usually tell you over the phone which series you’re dealing with.

One honest note: Preston Locksmith & Security is an independent service provider, not affiliated with Abloy. That means we service the lock without voiding anything you’d get from a manufacturer warranty, but we don’t claim to be an Abloy factory rep. For rekeying, that distinction rarely matters. What matters is that the discs are OEM Abloy, not aftermarket, because aftermarket discs wear unevenly and cause the key to stick after a few thousand cycles. We use OEM discs for this work, full stop.

Signs Your Abloy Lock Rekeying Is Failing

• The key turns hard halfway through the rotation. This usually means a disc is worn or a small piece of debris is lodged between discs. Abloy cylinders run on precise tolerances, so even a fleck of sand from a beach day in Santa Monica can make the key fight you.
• The key inserts but won’t turn at all. If this happens suddenly, a disc spring has likely broken. It’s not a lubrication problem, and spraying WD-40 into the keyway will make it worse by gumming the discs together.
• Old keys still work after you thought the lock was rekeyed. This is the big one. If a previous locksmith rekeyed your Abloy and an old key still turns, the disc stack wasn’t fully changed. A proper Abloy rekey kills every prior key. No partial work.
• The key needs wiggling to find the sweet spot. Worn discs lose their crisp alignment, so the key gets sloppy in the keyway. This is a sign the cylinder is nearing the end of its service life and should be rekeyed or rebuilt before it locks you out entirely.
• You hear a grinding feel when extracting the key. That’s metal-on-metal contact inside the cylinder, usually from a disc that has shifted out of its channel. Left alone, it scores the keyway and eventually seizes the cylinder.

Replacement Cost & What’s Included

Rekeying an Abloy lock in Los Angeles runs $35 – $85 per cylinder, and that includes the new discs, reassembly, and testing with the new keys. If you need new Abloy keys cut, those are $15 – $40 each depending on the series, with Protec keys running higher because the blanks are patent-controlled and cost us more. The total for a typical rekey job on a single Abloy deadbolt is around $55 – $120, and the price is the price. No call-out surcharge added when we arrive, no “discovery fee” once we open the cylinder. Kevin Yoon’s rule applies here: Real price on the phone. Same price at the door. That’s it.

What drives the range is the model. Classic and Disklock cylinders are faster to rekey because the disc stack pulls out without special tools on most iterations. Protec cylinders take longer because the discs sit in a nested assembly and the cylinder has to come apart in sequence. That extra 15 – 20 minutes of labor is why the top of the range exists. Every rekey we do in Los Angeles carries our 365-Day Done Right Promise – if the cylinder acts up within a year of our work, we come back and fix it, no charge on the second visit.

FAQ: Abloy Lock Rekeying

Call Preston Locksmith & Security

If you have an Abloy lock in Los Angeles and need it rekeyed, call (409) 405-4485. You’ll get a live person on the phone, a written price for the whole job, and a trackable arrival time so you’re not stuck waiting in a four-hour window. We show up in uniform, we show you the before-and-after, and the price on the phone is the price on the invoice. That’s the Relay Visibility Guarantee, and it’s how we’ve done every rekey since 2008. Kevin Yoon grew up in Koreatown and trained through the vocational locksmith program at Los Angeles Trade-Technical College, so he’s seen every Abloy series this city throws at a door. Tell him what lock you have and he’ll give you the real number. No phone tag. No runaround.

Written by Kevin Yoon, Owner, Preston Locksmith & Security at Preston Locksmith & Security, serving Los Angeles and nearby areas.