Non-destructive entry first, always - and we re-key Schlage, Kwikset, and Baldwin locks on the spot while you watch
You get a price before we start. It does not change when we arrive. No surprises.
Abloy Rekey Locks in Los Angeles: What to Know First
Abloy rekey locks in Los Angeles typically costs $35 to $85 per cylinder, depending on the series and how many locks you’re rekeying at once. We’re an independent Abloy service provider, and most residential rekey jobs are done the same day we arrive, usually within 45 to 90 minutes. The price we quote on the phone is the price on the invoice, no dispatch fee stacked on at your front door.
If you own Abloy locks, you’re already holding better hardware than most Angelenos. The disc cylinder design is tougher than pin tumbler locks by a wide margin. Rekeying them isn’t harder, but it is different, and a tech who’s only handled Kwikset and Schlage will be winging it. Kevin Yoon and our team have worked on Abloy Classic, Profile, Protec, and Protec2 cylinders across Los Angeles, from Hancock Park retrofit bungalows to Wilshire office suites. Call (409) 405-4485 and we’ll give you a real number before anyone gets in a truck.
How Abloy Products Fail – and How We Fix Them
- Lost or unreturned keys on Protec and Protec2 locks. These are the most common Abloy series we see in Los Angeles, often installed on front doors and side gates. Because Protec keys can’t be duplicated at a hardware store, losing one means either rekeying or replacing. We rekey the cylinder to a new key code, and old keys stop working immediately.
- Stiff key insertion on Abloy Classics. A key that doesn’t want to slide in is usually not a cylinder problem at all. It’s dust and dry air. Los Angeles is dusty and has long dry spells, and that fine grit works into the disc pack. We disassemble, clean out the debris, lubricate with a dry film lube, and the lock turns like it did on day one. If the discs are actually worn, we address that instead of masking it with extra lube.
- Forced-entry damage on Abloy Profile deadbolts. Abloy holds up better than most, but a kick-in will still bend the tailpiece or shear the mounting screws before the cylinder gives. When we see a Profile deadbolt that spins or feels loose, we pull it, check the tailpiece for twist, and replace with OEM-spec parts rather than whatever’s cheap. A bent tailpiece that isn’t replaced will quietly fail again, usually at the worst time.
- Previous locksmith butchered the rekey. This one’s all over Los Angeles. A tech without Abloy experience opens the cylinder, loses a disc or two, and reassembles with generic hardware. Now the owner has a lock that works sometimes and keys that fit loosely. We’ll sort out the disc stack in the correct order, check the locking bar, and put it back to factory smoothness, or tell you straight if it’s cheaper to drop in a fresh cylinder.
- Misaligned strike plates on Abloy deadbolts in older L.A. homes. Older houses shift. Foundation settling, earthquakes, even the daily thermal swing in the San Fernando Valley can move a door frame just enough that the bolt drags. On an Abloy, that drag makes the key feel like it’s fighting you. We realign the strike, shim if needed, and the key turns with one finger again.
Our Abloy Rekey Locks Process
When you call about an Abloy rekey in Los Angeles, here’s the sequence, start to finish:
- 1
You get a live person and a written price. We ask what lock you have, how many cylinders, and what neighborhood you’re in. Then we give you a firm range for the work. That number doesn’t move.
- 2
We send a live arrival time you can track. The Relay Visibility Guarantee means you see where your tech is and when they’ll be there. No four-hour window.
- 3
We inspect the hardware before touching a pin. We check the cylinder, the keyway, the tailpiece, and the strike. We look at key condition to confirm the lock is worth rekeying versus replacing.
- 4
You get a parts decision before any money’s spent. If your Abloy needs a new tailpiece, clips, or a sacrificial part, we show you the cost and let you choose OEM or matching-spec aftermarket. No surprises on the invoice.
- 5
We rekey to your new key. For Abloy, that means resetting the disc stack and cutting new keys to match. Old keys stop working before we leave.
- 6
We test, we hand you keys, we photograph everything. Before-and-after photos go in your job record. You get a digital invoice and a written 365-Day Done Right Promise. If the repair fails within a year, we come back at no charge.
What Abloy Rekey Locks Costs in Los Angeles
Here’s the honest pricing picture for Abloy rekey work in Los Angeles:
| Scenario | Typical Range |
|---|---|
| Rekey one Abloy cylinder (Classic or Profile) | $35 – $55 |
| Rekey two to three Abloy cylinders, same key | $70 – $140 |
| Rekey Abloy Protec or Protec2 cylinder | $55 – $85 |
| New Abloy keys (cut to new code) | $8 – $18 per key |
| Tailpiece or structural hardware replacement | $20 – $60 per part |
What moves the price: series your lock belongs to, number of cylinders, whether the cylinder needs internal cleaning or a part replacement, and your location in Los Angeles traffic. A call to Koreatown on a Tuesday morning costs less in drive time than one to Pacific Palisades at 5 p.m., and we’re upfront about that. No call-out surcharge hiding in the math. Call (409) 405-4485 for a free estimate. “Real price on the phone. Same price at the door. That’s it.”
Why Los Angeles Homeowners Call Preston Locksmith & Security for Abloy Work
Because Abloy locks are not the place to roll the dice with a budget tech. Kevin Yoon learned the trade through the vocational program at Los Angeles Trade-Technical College, and he’s been working on LA locks since 2008. Abloy hardware is in the rotation alongside Schlage, Kwikset, Medeco, and the rest because this city’s buildings have all of it, often on the same property. We’re trained on premium brands, not just whatever’s at the home center.
Every job includes the 365-Day Done Right Promise. If it’s not done right, we make it right, in writing, on every repair. Every technician is background-checked and uniformed. Every phone call hits a live person, 24/7. Every price is in writing before the first tool leaves the bag. And you get before-and-after photos so you can see exactly what we did, whether you watched the whole job or not.
FAQs
Yes. We don’t need the original key to rekey an Abloy cylinder. We’ll open the lock, reset the disc pack to a new key code, and cut you new keys. Old keys stop working immediately. Call (409) 405-4485 for a quote on your specific Abloy series.
Most Abloy rekey jobs get same-day or next-day service, depending on your neighborhood and our route load. Calls are answered by a live person 24/7, and you’ll get a trackable arrival time once we dispatch. If you’re in Koreatown, Silver Lake, or the Wilshire corridor, we’re usually close by.
Rekeying itself doesn’t void an Abloy warranty. Using the wrong parts or installing them badly does. We use OEM or matching-spec parts selected for your specific series, and our 365-Day Done Right Promise covers the work we do. If something fails within a year, we return at no charge.
Sometimes, yes. If the cylinder is worn, damaged, or has been previously mishandled, a new cylinder can run $45 to $120 installed, which can be the smarter money. We’ll inspect and tell you which option actually saves you money, not which one costs you more. Estimates are free.
Because we put it in writing before work starts. The price you get on the phone is the price on the invoice. No dispatch fee, no inflated part charges, no surprises. That’s the whole point of The Relay Visibility Guarantee.
Written by Kevin Yoon, Owner, Preston Locksmith & Security at Preston Locksmith & Security, serving Los Angeles and nearby areas.






