Non-destructive entry first, always - and we re-key Schlage, Kwikset, and Baldwin locks on the spot while you watch
You get a price before we start. It does not change when we arrive. No surprises.
Fast, Reliable Commercial Locksmith Across Colma
Commercial locksmith work in Colma comes down to one thing: getting a business door open, rekeyed, or upgraded without slowing down the people who keep the town running. Most of the storefronts, dealerships, and service doors here sit along Junipero Serra Boulevard, Hillside Boulevard, and around the BART station, so we plan our routes around Colma’s actual commercial blocks, not a generic service map. When you call (409) 405-4485, you get a live person, a written price before dispatch, and a trackable arrival time. We don’t send a nameless tech in an unmarked van to a mortuary or dealership and hope for the best.
Why Preston Locksmith & Security Is Colma’s Preferred Commercial Locksmith Company
Colma is small enough that word travels fast. A locksmith who shows up late to a shop on Mission Road, or quotes one price and invoices another, hears about it from the next business over. That’s why our process is built to be verifiable before the first tool comes out. Every job starts with a written scope and a flat price, not an hourly guess. Our technicians arrive in uniform with company ID, and you get a live tracking link so you know exactly when we pull up.
What catches Colma business owners by surprise is how much of our commercial work is scheduled, not emergency. A dealership parts-room keypad that stops recognizing codes, a chapel door mortise lock that needs rekeying, a back stockroom that needs its own key level. These jobs get a written quote, a set time, and a digital invoice with before-and-after photos. No phone tag, no four-hour windows. Founded in 2008 and part of the Relay Home Co. family, we’re independently owned and operated, and every repair carries the 365-Day Done Right Promise. If it’s not right, we come back and make it right, free.
Master Key System in Colma
A Master Key System in Colma gives one key to the owner and separate, restricted keys to managers, night leads, or cleaning crews, each opening only the doors it should. For a small business with one storefront and a back stockroom, that usually means the owner’s key opens everything, the manager’s key opens the front and stockroom but not the cash office, and the cleaning crew’s key opens only the front door. We cut and pin the cylinders on site, issue the keys, and hand you a key chart so you know exactly who can open what. A basic three-level master key system for a Colma storefront typically runs $220 – $380, depending on how many cylinders and keys are involved.
How We Build the Cylinders
We pin each cylinder with master wafers so multiple keys operate the same lock at different access levels. The work is done on a bench in our service vehicle, then each cylinder is reinstalled and tested in place. You get a key schedule on paper, not just a pile of keys.
When Rekeying Is Enough
If you already have a master system and just need to cut off a former employee, rekeying is cheaper and faster than replacing hardware. In Colma, rekeying a standard commercial mortise cylinder runs $35 – $55 per cylinder, written price confirmed before we start.
Mortise Lock Replacement in Colma
Mortise Lock Replacement in Colma is one of the most common jobs we do on older commercial doors, especially the chapel doors at mortuaries and the solid-core doors at dealerships along Junipero Serra Boulevard. A mortise lock is the rectangular lock body that slides into a pocket cut into the edge of the door, not the round deadbolt most people picture. When the internal springs wear out or the latch stops retracting, we pull the old body, match the new one to the existing door prep, and install it so the door closes cleanly. A new mortise lock for a Colma commercial door typically runs $180 – $400 installed, depending on the brand and whether you want a keyed cylinder, thumbturn, or both.
Replace vs. Rekey
Not every failing mortise lock needs to be replaced. If the body is sound but the keys have changed hands, we can rekey the existing cylinder for $35 – $55 per cylinder. We’ll tell you straight which route makes sense after looking at the lock.
What We Install
We stock and install Sargent, Baldwin, and Yale mortise locks, plus Medeco high-security cylinders for businesses that want keys that can’t be duplicated at the hardware store. Every install comes with our 365-Day Done Right Promise in writing.
Trusted Brands We Service in Colma
We work on Medeco, Sargent, Yale, Baldwin, Kwikset, Schlage, Mul-T-Lock, and Abloy hardware. On a Colma service call, that matters. A mortuary chapel door with a Baldwin mortise lock needs different parts than a BART-adjacent storefront with a Kwikset deadbolt. We carry common cylinders, pins, and latch parts in our service vehicles so most jobs are completed same-day without a second trip. If you need a Medeco high-security rekey or a Baldwin mortise body swapped, we can usually quote it, source it, and schedule the install within a few days.
Common Commercial Locksmith Problems We See in Colma Homes
- Worn mortise locks on solid-core doors. Colma’s older commercial buildings, especially the funeral homes and mortuary chapels, have doors that have been opening and closing for decades. The internal springs and levers in a mortise lock eventually fail, and the latch stops retracting.
- Keypad entry locks that stop recognizing codes. Dealerships and storefronts near the BART station run keypad entries hard, often by night crews. The electronics outlast the mechanical parts, and a worn pin and tumbler stack can make the keypad useless even when the codes are right.
- Lost or unreturned storefront keys. When an employee leaves and takes a key, or a manager’s key disappears, the safe move is rekeying, not just cutting a new copy. We can rekey a standard commercial cylinder same-day.
- Doors that don’t close cleanly after a lock replacement. If a previous locksmith didn’t align the strike plate or the latch sits too tight, the door binds. We fix the hardware and the fit in the same visit.
Pricing for Commercial Locksmith in Colma, CA
Here’s what commercial work actually costs in Colma. A commercial lockout, done non-destructively whenever the door and lock allow it, runs $95 – $165. Rekeying a standard commercial cylinder runs $35 – $55 per cylinder. A master key system for a small storefront runs $220 – $380. Mortise lock replacement runs $180 – $400, and a panic bar install runs $260 – $450. Access control for a single door can run $400 – $900, depending on whether you want a keypad, card reader, or both. We quote the full price on the phone before anyone is dispatched, and that price is the price on your invoice. No call-out surcharge added on arrival.
We Also Serve Cities Near Colma
If your business sits just outside Colma, our Commercial Locksmith team also covers Los Angeles, San Diego, San Jose, and San Francisco. Same written pricing, same trackable arrival, same 365-Day Done Right Promise. Call (409) 405-4485 and tell us where the door is.
Serving Colma, CA - Our Local Coverage Area
We’re based in the Colma area and know this community well. Use the map below to see our service coverage - if you’re nearby, we can almost certainly help.
FAQs About Commercial Locksmith in Colma
You get a live tracking link with the technician’s name, photo, and ETA before they arrive, and they show up in a Preston Locksmith & Security uniform with company ID. No anonymous techs, no subcontractor surprises. Call (409) 405-4485 and ask for the name of your tech before we dispatch.
Yes, and it’s usually simpler than owners expect. A basic three-level system with an owner key, manager key, and cleaning-crew key typically runs $220 – $380 in Colma. You get a key schedule showing who can open which door. Call (409) 405-4485 for a written quote on your specific doors.
Usually yes. If the lock body is sound, rekeying the existing cylinder costs $35 – $55 per cylinder. If the internal springs are worn, replacement runs $180 – $400. We’ll inspect the lock and tell you which is necessary before any work starts. Call (409) 405-4485 to schedule a look.
An ANSI Grade 1 deadbolt is tested to withstand more forced-entry cycles and heavier use than a standard residential deadbolt. For a Colma storefront or dealership parts room, Grade 1 is the right call. Installed, they run $120 – $220, and we stock them in our service vehicles.
Yes. When you call (409) 405-4485, you get a written price before dispatch. That’s the price on the invoice, full stop. No call-out surcharge, no price that changes when the tech arrives. If we need to see the door in person to quote a bigger job, we’ll tell you that upfront and schedule a time that works.
Written by Kevin Yoon, Owner at Preston Locksmith & Security, part of the Relay Home Co. family.






