Non-destructive entry first, always - and we re-key Schlage, Kwikset, and Baldwin locks on the spot while you watch
You get a price before we start. It does not change when we arrive. No surprises.
Fast, Reliable Commercial Locksmith Across Selma
Commercial locksmith work in Selma usually means one of three things: a lockout during business hours, a rekey after an employee leaves, or upgrading worn builder-grade hardware on an older storefront. Most jobs along the Whitson Street and Front Street corridors take under an hour once our tech arrives. We answer the phone live, 24/7, at (409) 405-4485, and the price is written down before anyone is dispatched. No bait quote, no surprise trip fee. Just a background-checked, uniformed tech who shows up with the exact hardware your door needs.
Why Preston Locksmith & Security Is Selma’s Preferred Commercial Locksmith Company
Most of our commercial calls in Selma come from business owners who were told one price over the phone and a different one on-site. That does not happen with us. Kevin Yoon and the Preston team have worked enough Selma storefronts to know that the doors here are older, the frames are often sagging, and the cylinders are usually builder-grade pin and tumbler. We quote honestly for the actual work, not a teaser number. Every job is backed by our 365-Day Done Right Promise: if it is not done right, we make it right, and a free second visit is included if the repair fails.
Booking is simple. You call, a live person answers, we schedule a time, and we send a written price before dispatch. The tech arrives in uniform, and you get before-and-after photos of the work. For businesses in Selma, that level of accountability matters, especially when a back shop door has had keys floating around for years.
High Security Locks in Selma
High security locks in Selma are a practical upgrade for businesses along Front Street and the warehouse edges of town, where older pin and tumbler cylinders make key duplication easy and key control nearly impossible. The work involves replacing or retrofitting existing hardware with restricted keyway cylinders from Medeco or Mul-T-Lock. These keys cannot be duplicated at a hardware store; only the authorized dealer can cut a new one. For a Selma business dealing in produce distribution or equipment storage, that matters. A flat key-control lock typically runs $145-$325 per cylinder installed, written price confirmed before we start.
Keyed-Alike and Master Key Options
Most Selma shops do not need a full electronic access system. A keyed-alike setup, where one key works the front entry, back shop door, and office, is usually the right call. We can also build a modest master key system with two or three key levels for businesses that need manager access without handing out every key.
What It Actually Costs to Upgrade
Plan on $145-$325 per cylinder for a high security retrofit in Selma. A full storefront with three doors might run $500-$900 total, parts and labor included. You get the number in writing before work begins.
Commercial Door Repair in Selma
Commercial door repair in Selma is less about lock problems and more about the door itself: sagging hinges on steel frames, misaligned latches on wood-frame entries, and panic bars that no longer retract smoothly. Older buildings along the Whitson and Front Street corridors are especially prone to this. We repair commercial door closers, replace hinge pins, realign strike plates, and adjust panic hardware. A standard repair visit runs $85-$185, while closer replacement or panic bar repair typically runs $220-$450 depending on the hardware. We quote the full price before dispatch.
Panic Bar Adjustment and Repair
Panic bars on Selma storefronts get daily abuse and periodic jams. The bar itself may be fine, but the latch or rod alignment has drifted. We adjust tension, replace worn rods or broken end caps, and test the full exit stroke before leaving.
Door Closer and Hinge Work
A door that slams or will not close fully is a security problem. We replace worn closers, repack hinge screws when the frame is stripped, and correct the door so the deadbolt actually seats. For most Selma commercial doors, this is a one-visit job.
Trusted Brands We Service in Selma
We are trained and equipped for the hardware most Selma storefronts already have: ordinary Schlage and Kwikset cylinders, older Yale mortise locks, and Baldwin hardware on the rare upgraded entry. On the high-security side, we work with Medeco and Mul-T-Lock restricted keyways. Since we hold common cylinders, key blanks, and panic bar components in our service vehicles, a Selma job rarely requires a second trip for parts. We service what is on your door, but we will tell you honestly if replacing a worn cylinder is cheaper than repairing it.
Common Commercial Locksmith Problems We See in Selma Homes
- Former employee keys still work. Selma businesses change hands and staff regularly, and we routinely find that back shop doors and offices still accept keys held by people who left months ago. Rekey the cylinder rather than replacing the lock, which costs less and restores key control immediately.
- Drilled locks from a bad previous job. A tech without the right keyway knowledge ruins a mortise lock, and the door is left out of service. We regularly repair or replace cylinders that a previous locksmith destroyed on Selma commercial doors. A mortise cylinder can usually be opened non-destructively.
- Worn builder-grade cylinders on old storefronts. Selma’s commercial doors are often decades old with original pin and tumbler locks. A worn cylinder gets sloppy, sticks, and may fail entirely. Upgrading to a high-security cylinder fixes the problem for good.
- Sagging doors that will not latch properly. After years of heat and settling, steel frames along the older Selma commercial corridors drift. A deadbolt that will not seat is no security at all. We realign the strike and reposition hinges so the door closes and locks correctly.
Pricing for Commercial Locksmith in Selma, CA
Here is what commercial locksmith work actually costs in Selma. A commercial lockout runs $85-$160. Rekeying a standard commercial cylinder runs $25-$45 per cylinder, with a service visit fee. High-security cylinder installation runs $145-$325 per cylinder. Commercial door repair runs $85-$185 for the visit, and $220-$450 for closer or panic bar work. Access control or master key systems are quoted per site after a walk-through. The price we quote on the phone is the price on your invoice. Call (409) 405-4485 for a free estimate and a written price before anyone is dispatched.
We Also Serve Cities Near Selma
Our Commercial Locksmith team covers the Selma area and the surrounding Central Valley communities. If you run a business in Fowler, Parlier, Kingsburg, or Reedley, we offer the same written price and trackable arrival for your commercial door work. Selma remains our core local service area, but nearby towns are a regular part of our route.
Serving Selma, CA - Our Local Coverage Area
We’re based in the Selma area and know this community well. Use the map below to see our service coverage - if you’re nearby, we can almost certainly help.
FAQs About Commercial Locksmith in Selma
Commercial lockouts in Selma run $85-$160, which is higher than a typical residential lockout because commercial locks often require different tools and techniques, especially on mortise or panic bar entries. You get the full price before we dispatch, and there is no added on-site fee. Call (409) 405-4485 and we will quote the exact number for your door.
Yes, and for most Selma commercial doors, rekeying is the smarter and cheaper option. Rekeying means we swap the internal pins inside the cylinder so the old keys stop working and a new key operates the lock. It runs $25-$45 per cylinder for standard pin and tumbler hardware. No new lock needed.
Every Preston Locksmith & Security tech arrives in a marked uniform, and before anyone is dispatched you get a written photo of the tech and a live trackable arrival time through The Relay Visibility Guarantee. You will know who is coming and when they will get there before they knock. If a locksmith shows up at your Selma business without that, call us at (409) 405-4485.
We service and install Schlage, Kwikset, Yale, Baldwin, Medeco, and Mul-T-Lock hardware. That covers standard pin and tumbler cylinders, mortise locks, panic bars, and restricted high-security systems. We stock common parts on our vehicles, so most Selma jobs are completed in a single visit.
Yes. A master key system lets a manager carry one key that opens every door, while employees get keys that only open the doors they need. For a Selma shop or produce office, this typically runs $500-$1,200 for a basic three-level system, quoted after a site walk-through. Call (409) 405-4485 to schedule that walk-through and get a written scope.
Written by Kevin Yoon, Owner at Preston Locksmith & Security, serving Selma and the Central Valley since 2008.






