Non-destructive entry first, always - and we re-key Schlage, Kwikset, and Baldwin locks on the spot while you watch
You get a price before we start. It does not change when we arrive. No surprises.
Fast, Reliable Rekey Locks Across Georgetown
Rekeying a lock in Georgetown means swapping the internal pins so old keys stop working and new keys take over, no new hardware required. Most Georgetown rekey jobs run $85 – $135 per lock cylinder, and we give you that number in writing before a technician heads your way. If you bought a house off Main Street, fired a property manager near the fairgrounds, or just want one key for every door on a rural parcel, call (409) 405-4485. We serve Georgetown with background-checked techs who arrive in uniform and hand you a written price before a single tool leaves the bag.
Why Preston Locksmith & Security Is Georgetown’s Preferred Rekey Locks Company
We’re not the cheapest quote you’ll get in Georgetown, and we’re fine with that. We’re the quote that doesn’t move. Homeowners around Main Street and up toward Volcanoville have told us the same thing: they called someone else first, got a low number on the phone, and watched it grow at the door. Our process removes that. You get a written price before dispatch, and that is the price on your invoice. No trip fee added on arrival, no after-hours surprise.
Response time to most Georgetown addresses runs 45 to 75 minutes. Techs are dispatched from the Los Angeles coordination office, but the crews serving Georgetown are local and know the roads: Wentworth Springs Road, Main Street, the residential pockets off Church Street, and the rural lanes that show up poorly on GPS. Kevin Yoon, who leads our team, has built the Georgetown operation around one principle: a rekey is a small job that matters a lot, so treat it with the same written guarantee as a commercial access-control install. Our 365-Day Done Right Promise applies here too. If the rekey isn’t done right, we return and make it right, free.
Rekey Service in Georgetown
Rekey Service in Georgetown usually means one thing: you have a working lock you want to keep, but you don’t trust who might still hold a key. The job is mechanical. We remove the cylinder, swap the internal pin stack, and cut new keys. Old keys go dead. In Georgetown, we see this most often after a home sale, a tenant change, or a divorce where someone kept a spare. A standard residential rekey runs $85 – $135 per cylinder, including the new keys. If the lock is a Kwikset SmartKey, the process shifts slightly, and we’ll quote that before starting.
When a rekey beats replacing the whole lock
If your Georgetown home has an older Schlage or Kwikset deadbolt that still throws cleanly, a rekey preserves that hardware and saves you the cost of new locks plus installation. We’ll tell you honestly if the lock is worn past rekeying. Some Georgetown doors, especially on historic Main Street buildings, carry original mortise lock bodies that need a compatible cylinder or a different pin set. We price that before we touch it.
What you get on the day of the job
A named, background-checked tech arrives in uniform. You get a live trackable arrival time before dispatch, so you’re not waiting through a four-hour window. The tech confirms the price in writing, does the rekey, tests every key in every cylinder, and sends before-and-after photos through our Relay system. You get a digital invoice with a pay link. That’s the whole sequence.
Keyed Alike in Georgetown
Keyed Alike in Georgetown means re-pinning multiple locks so one key operates all of them. It’s the request we hear most from Georgetown buyers who just closed on a home with a front-door key, a back-door key, a shed key, and a mystery key that fits nothing. We pull each cylinder, set the pins to match a single key cut, and test every opening. Cost runs $85 – $135 per cylinder for standard Schlage or Kwikset hardware. For Medeco or higher-security cylinders, the per-cylinder price moves into the $135 – $185 range because the pins and key blanks cost more.
One key for every door, including the outbuildings
Georgetown has a lot of rural parcels with a detached workshop, a generator shed, or a well-house padlock that nobody has opened in years. Keying those alike with the house is common when a property transfers. We’ll walk the property with you, identify each cylinder, and give a single written price for the whole set before we start. No per-visit multipliers, no discovering an extra charge halfway through.
What it doesn’t require
Keying alike doesn’t require new locks. A lot of Georgetown homeowners assume they need to replace everything to get one key, and that’s rarely true for standard pin-and-tumbler hardware. If the lock bodies are solid, we re-pin them. If one cylinder is a different brand with a different keyway, we’ll tell you which option costs less: a compatible cylinder or a one-off re-pin. You decide with the numbers in front of you.
Trusted Brands We Service in Georgetown
We carry pins, springs, and key blanks for Schlage, Kwikset, Medeco, and Yale, which covers the overwhelming majority of Georgetown locks. Older Main Street buildings often have Schlage deadbolts above original mortise locks, and rural homes lean heavily on Kwikset knobsets and deadbolts that were installed in the last twenty to thirty years. Medeco shows up on some commercial doors and higher-end homes. Because we stock locally and our Georgetown techs carry a full pin kit, most rekeys happen in one trip. We don’t order parts and come back next week.
Common Rekey Locks Problems We See in Georgetown Homes
- Split-key situations after a purchase. New owners get a front-door key from the agent but the back deadbolt is on a different key or has no key at all. We re-pin everything to match and cut enough new keys for the family.
- Mortise locks in historic Main Street buildings. These aren’t modern cylinders. They take different pins or a cylinder swap, and a tech who doesn’t recognize the body will mangle it. We price the fix before opening the door plate.
- Rural properties with outbuildings. A Georgetown house on a well-and-septic parcel almost always has a detached garage or shed with its own lock. Nobody knows where that key went. We key it alike with the house and eliminate the mystery key ring.
- Foreclosure cleanouts and rental turnovers. These jobs often come with a tight timeline and a lender or property manager who needs written confirmation. We provide the quote, the rekey, and the photo documentation the same day.
Pricing for Rekey Locks in Georgetown, CA
| Service | Price Range |
|---|---|
| Standard rekey (Schlage, Kwikset, Yale cylinder) | $85 – $135 per cylinder |
| Keyed alike (2+ standard cylinders) | $85 – $135 per cylinder |
| High-security rekey (Medeco or Mul-T-Lock) | $135 – $185 per cylinder |
| Mortise lock cylinder rekey (historic Georgetown buildings) | Quoted on site, written before work begins |
What moves the number: how many cylinders, whether they’re standard or high-security, and whether a mortise body needs a cylinder swap instead of a pin change. What doesn’t move it: distance, time of day, or a tech deciding the job “needs more” once he’s standing in your driveway. The price we agree on the phone is the price on the invoice. Every Georgetown job includes the 365-Day Done Right Promise. If something isn’t right, we fix it. Free first re-visit if the repair fails.
We Also Serve Cities Near Georgetown
Our Georgetown coverage extends into Foresthill, Placerville, Colfax, and Pollock Pines. If you’re on the edge of town or just outside, call us. Our full Rekey Locks page covers the broader service area, and this Georgetown page is where you’ll find our most current local pricing and response times.
Serving Georgetown, CA - Our Local Coverage Area
We’re based in the Georgetown area and know this community well. Use the map below to see our service coverage - if you’re nearby, we can almost certainly help.
FAQs About Rekey Locks in Georgetown
Yes. The price is quoted on the phone before anyone is dispatched, and that is the exact price on your invoice. No trip charge appears at the door, no after-hours multiplier sneaks in. If we discover something inside the lock that changes the job, we stop, explain it, and get your sign-off on a new written price before doing anything else. Call (409) 405-4485 for a free estimate.
In most cases, yes. Mortise lock bodies take a different cylinder style than modern Kwikset or Schlage hardware. Some accept a re-pin; others need a new mortise cylinder installed in the existing body. We quote that distinction before we start, and we carry the common mortise cylinders Georgetown’s older buildings use.
For a standard front-and-back rekey with two or three cylinders, expect 30 to 60 minutes on site. Keyed-alike work across a house plus a shed or garage usually runs under 90 minutes. Historic mortise locks can add time if the body needs cleaning or a cylinder swap. We quote the time range when we quote the price, so you’re not guessing.
The outside of your lock doesn’t change at all. Inside, the pin stack is swapped so the old key cuts no longer align the pins. Only the new key turns the plug. Your old key becomes a piece of brass that fits in the slot and does nothing. It’s the most cost-effective way to lock out unknown key holders without replacing hardware.
When you book with us, you’ll get the tech’s name, photo, and live trackable arrival time through our Relay visibility system. The person who arrives will match the photo and be wearing company uniform. They’ll show ID and confirm the written price before they touch a lock. In Georgetown, a small town, we understand you want to verify who’s at your door, and we make that easy. Call (409) 405-4485 for a free estimate.
Written by Kevin Yoon, Owner at Preston Locksmith & Security, serving Georgetown since 2008.