Non-destructive entry first, always - and we re-key Schlage, Kwikset, and Baldwin locks on the spot while you watch
You get a price before we start. It does not change when we arrive. No surprises.
Fast, Reliable Rekey Locks Across Gladeview
Rekeying a lock in Gladeview means changing the internal pins inside the cylinder so old keys stop working, and it typically runs $60 – $120 for the first lock and $20 – $40 per additional cylinder on the same visit. It’s faster and cheaper than replacing hardware, especially in the older Gladeview homes still holding original mortise locks that match the door and the house. Our crews are already moving through the neighborhoods off NW 22nd Avenue and NW 71st Street. Call (409) 405-4485 and you’ll get a written price before anyone gets in the truck.
Why Preston Locksmith & Security Is Gladeview’s Preferred Rekey Locks Company
Gladeview homeowners keep our number for one reason: the price we quote on the phone is the number on the invoice. No bait number, no surprise “specialty hardware” charge when the tech is already standing in the driveway. We’ve rekeyed original mortise locks in the concrete-block ranch homes south of NW 79th Street and newer deadbolt sets in the two-story infill near the Gladeview park blocks off NW 21st Court, and we know the difference before we arrive.
Every tech is background-checked, uniformed, and shows a live arrival time you can track. You’ll see our photo and name before we knock. Kevin Yoon has led this crew since 2008, and the standard hasn’t moved: written estimate first, work second. We also hand you before-and-after photos of the cylinder and the pins, so you can see exactly what changed inside the lock. That’s the Relay Visibility Guarantee, and it applies to every Rekey Locks job we run in Gladeview without exception.
Rekey Deadbolt in Gladeview
Rekey deadbolt work in Gladeview usually means re-pinning the cylinder so the old key is dead and a fresh key operates the bolt. On a standard single-cylinder Schlage or Kwikset deadbolt in the newer homes along NW 69th Street, that runs $60 – $120 depending on the cylinder type and whether it’s paired with a knob or lever that needs matching. Two-deadbolt entry setups typically run $100 – $180 total, and we write that number down before any tool comes out of the bag.
When a Gladeview Deadbolt Needs It
After a tenant moves out, a roommate leaves, a cleaner or dog walker quits, or a key goes missing somewhere between Hialeah and the house. You don’t need new hardware. You need the old key to stop existing. We do that by pulling the cylinder, swapping the internal pins to match a new key, and testing the bolt throw in the existing strike plate.
What It Costs and What It Doesn’t
The quoted price includes the new keys, the re-pin labor, and the test. It does not include a surprise “after-hours premium” or a “specialty cylinder” line item added on arrival. If the deadbolt is a Baldwin or Medeco high-security cylinder, expect $90 – $150 per cylinder because the pins and sidebars cost more and take longer to gut and rebuild. We stock those pin kits on the van.
Rekey House in Gladeview
A rekey house call in Gladeview means we walk every exterior door, then re-pin each cylinder to one new key so the front, back, and side entries all operate from the same cut. On the 1950s concrete-block homes still carrying original mortise locks, that’s a re-pin-in-place job, not a hardware swap. A full Gladeview house rekey, including all exterior doors and the deadbolts, runs $120 – $260 for a typical three-door home. We write that range down after we hear how many locks you have and whether they’re mortise, cylindrical, or a mix.
One Visit, All Entry Points
Most Gladeview homes have two or three exterior entry points: the front door off the street, a rear door near the yard, and sometimes a side door from a carport. We do all of them in one trip. One new key opens everything, and every old key stops working before we leave. You get a key count in writing, and we hand you the test keys to verify in front of us.
Keeping Original Mortise Hardware
The front door on a 1950s Gladeview ranch often still has its original mortise lock body mortised into the door edge. Replacing that with a modern cylindrical deadbolt leaves an untidy bore and a door that doesn’t close as true as it did. We re-pin that mortise cylinder in place, and the door keeps its original faceplate, its original throw, and its original look. You keep the hardware that matches the door, and the old key stops turning.
Trusted Brands We Service in Gladeview
We stock pin kits and common replacement cylinders for Schlage, Kwikset, and Medeco, and we service Abloy and Baldwin hardware as well. Gladeview homes run the full mix: everyday Kwikset knobs on rental units, Schlage deadbolts on newer infill, and the occasional Medeco high-security cylinder on a front door the owner wants to keep tight. Because we carry the pins and not just the branding, we can usually finish a straight rekey in under an hour on site. No waiting on a parts run to Hialeah.
Common Rekey Locks Problems We See in Gladeview Homes
- Original mortise locks swapped for cylindrical deadbolts. We see older concrete-block homes off NW 22nd Avenue where a previous tech drilled out a mortise lock and screwed in a cheap deadbolt. The door no longer closes true, and the homeowner paid for hardware they didn’t need because the mortise cylinder could have been re-pinned in place.
- Teaser price, then an after-hours surprise. A Gladeview homeowner gets quoted a flat number over the phone, then once the tech is in the driveway an “after-hours specialty fee” appears. That doesn’t happen with us. The price is in writing before dispatch, and it’s the price on the invoice.
- Multi-unit properties rekeyed without key control. On shared-entry Gladeview properties, a unit door gets rekeyed but the common entry door was never pinned for a master key system. So the tenant who moved out still has a working key to the shared hallway or laundry room. We set up proper key control so one key can clip the common doors while each unit turns independently.
- Humidity and salt air gumming up older cylinders. Gladeview’s heat and damp work their way into unlubricated lock cylinders, especially on doors that face east into the morning sun and then sit in afternoon rain. A rekey is the right moment to clean and lubricate the cylinder, which keeps the new pins turning smoothly for years.
Pricing for Rekey Locks in Gladeview, FL
We Also Serve Cities Near Gladeview
Our crews service Gladeview and the surrounding South Florida cities, including Miami, Hialeah, Miami Gardens, and Homestead. If you’re just over the line in Hialeah or on the northwest edge of Miami, the same written-price standard applies. One phone call gets you scheduled across the whole area.
Serving Gladeview, FL - Our Local Coverage Area
We’re based in the Gladeview area and know this community well. Use the map below to see our service coverage - if you’re nearby, we can almost certainly help.
FAQs About Rekey Locks in Gladeview
How do I know the locksmith at my Gladeview door is actually from Preston Locksmith & Security?
You’ll see our tech’s photo, name, and live arrival time before they knock. Every Preston tech is background-checked and arrives in uniform, and the Relay Visibility Guarantee means you get before-and-after photos of the work plus a written invoice with a payment link. Call (409) 405-4485 and we’ll confirm the tech’s name before they head your way.
My Gladeview house still has the original mortise lock – can you rekey it or do I have to replace it?
You can rekey it. We pull the mortise cylinder, re-pin the existing pin and tumbler set to new keys, and reinstall it in the original door. No new hardware, no drilled door. The original lock keeps its faceplate and its throw, and the old key stops working. We do this regularly on the 1950s concrete-block homes across Gladeview.
Will rekeying my Gladeview locks leave visible damage or require drilling?
No. A proper rekey pulls the cylinder and re-pins it internally. The door, faceplate, and hardware stay exactly where they are. If a previous lock was installed badly or the cylinder is seized from salt air and humidity, we’ll tell you what’s needed before we touch anything, and the cost is in writing first.
Do you rekey both deadbolts and the main entry on a Gladeview house in one visit?
Yes. We walk every exterior door, re-pin each cylinder to one new key, and test each lock in front of you. A typical three-door Gladeview house with deadbolts and entry knobs is finished in under two hours. The full price is quoted on the phone, and it’s the number on the invoice.
Can you set up a master key system for a multi-unit property in Gladeview?
Yes. We pin each unit’s cylinder to its own key and pin the common entries to a master key that operates them all. That means a tenant who moves out loses access to their unit and the shared doors, while you and a manager keep one key for everything. We’ll walk the property first and hand you a written scope with a flat per-lock price. Call (409) 405-4485 to schedule a walkthrough.
Written by Kevin Yoon, Owner at Preston Locksmith & Security, serving Gladeview and South Florida since 2008.